Flux cored solder wire
Sn-Pb flux cored solder wire SUPER ROSIN series
Good wettability
Abundant automotive field with long history
- Good wettability and low spattering
- The special activator enables to achieves both of high wettability and low spattering.High quality soldering can be done in various components.
- GXM
- Standard of super rosin series.Good balance of wettability,low spattering ando reliability,widely approved for the automotive electrical equipment,home appliances and consumer products.
- Abundant automotive experience
- Approved by a lot of users including automotive for more than 25 years since released
- GXB
- The most wettable product in super rosin series.Good wettability to flame base material such as brass has been approved to such as the switch parts, and so on.
- GXR
- This is the most reliable products in super rosin series.It is the best to apply to the product which emphasizes reliability,such as,substrate portions of automobiles and industrial equipment and so on.
| Test items | Flux type | Flux contents(%) | Alloy type | Characteristics | Applicable base material | diameter(mm) |
|---|---|---|---|---|---|---|
| GXM | JIS A MIL RMA |
3 | Sn40-Pb Sn45-Pb Sn50-Pb Sn60-Pb Sn63-Pb |
Non clean for Robot soldering |
Cu Cu oxide Brass |
1.6, 1.2, 1.0, 0.8, 0.6, 0.5, 0.4, 0.3 |
| GXB | JIS B MIL RA |
2 | Prevent solder ball/flux spattering | Cu Cu oxide Brass |
1.6, 1.2, 1.0, 0.8, 0.6, 0.5, 0.4, 0.3 | |
| GXR | JIS AA MIL RMA |
3 | Non clean, Less soder balls, Less spattering | Cu Cu oxide Brass |
1.6, 1.2, 1.0, 0.8, 0.6 | |
| BRA | JIS A MIL RA |
2 | Long lasting activation Excellent reliability |
Cu Nickel |
1.6, 1.2, 1.0 |
